How Does Precious Coin Tester Work?

When you tap a coin, it rings. That ring is not random: it is set by the coin's shape and by the metal it is made of. Precious Coin Tester listens to that ring and checks whether it is consistent with a gold or silver coin of the size and weight you selected.


Same Shape, Different Metal, Different Sound

A struck coin rings with its own pitch: a few tones mixed together, like a small bell (physicists call these its resonant frequencies). The pitch depends on two things:

  • Geometry: diameter, weight, and thickness.
  • Material: how stiff and how dense the metal is.

Gold, silver, copper, lead and tungsten all have different combinations of stiffness and density. So two coins with the same weight and diameter but different metals always ring differently. This is the principle behind the traditional ping test, where an experienced collector judges the sound by ear.

The catch is that geometry matters just as much as metal. A large base-metal coin can ring like a small silver one. That is why the app needs to know which coin you are testing.


What the App Does

  1. You tell the app what the coin should be. Select it from the catalog of over 40,000 coins, or enter its diameter, weight and metal in Customization mode.
  2. You ping the coin. Hold it on a fingertip near the microphone and tap it lightly. The app records the ring and filters out background noise.
  3. The app measures the pitch. It picks out the tones of the coin's ring from the recording.
  4. The app compares. It checks whether those tones are consistent with a coin of that size and weight made of the expected gold or silver alloy.
  5. You get a result. A pass, a fail, or a request to test again when the sound was too poor to judge.

For high-purity coins (above 70%), the app goes beyond a sound match. Our own algorithm also estimates a minimum purity: "the estimated purity is at least X%". This is a conservative floor, not a point estimate: the coin is at least that pure, and the true value is usually higher. Read more about understanding your purity result.

Watch the app in action in this video.


Why the Correct Coin Selection Matters

The app cannot see your coin. It assumes the coin in your hand matches the coin you selected. If the weight or diameter differs, the comparison is meaningless, whether the result says pass or fail. Before every test, check that the displayed weight, diameter and metal match your coin. See why selecting the correct coin matters for real examples.


What a Ping Test Can and Cannot Prove

The ping test measures material, deep inside the coin, without damaging it. This makes it effective against the most common fakes: base metals, plated coins and tungsten cores.

It has limits:

  • It cannot tell a genuine coin from a replica struck in the same alloy. It verifies metal content, not mint origin.
  • It works only on round coins with uniform thickness and no holes.
  • Very low-purity coins are harder to judge. See the limitations in the user manual.

For high-value coins, combine the ping test with another method, such as a conductivity tester. Our fake Trade Dollar case shows why.


Get Reliable Results

Follow our best practices: use the catalog, verify the parameters, and wait 1 to 2 seconds between pings. To see how the ping test compares with other methods, read how to test gold coins and how to test silver coins.